parameter
speed: 800-2500rpm
spindle rotation accuracy: ≤ 0.0005mm
applicable machine tool: centerless grinding
features: high precision, high rigidity, high service life, high bearing capacity High vibration resistance
precautions for the use of dynamic and static pressure spindle
1. Replace 2 spindle oil and coarse and fine filter element after one year of normal use
2. Three layers of silk cloth must be filtered and added when Replenishing Oil in the normal use of the pump station
3. The loading and unloading of spindle pulley and grinding wheel must be carried out under the working state of pump station. That is, the spindle is carried out in the state of hydrostatic oil floating, so that the spindle will not be damaged
4. Before the grinding wheel spindle works, observe whether the pump station pressure and grinding head static pressure are within the specification range
5. When the equipment is shut down, be sure to stop the grinding head motor first, and then turn off the pump station after the grinding wheel stops stably, otherwise it is easy to damage the grinding head
when replacing any part on the pump station, the high-pressure air inlet hose connector must be removed first. After replacing the part, the air inlet pipe circulates the channel for 15-20 minutes before connecting with the grinding head. In order to ensure that the spindle oil of the grinding head enters after being thoroughly filtered by ultra-pure spindle oil, therefore, Extending the service life of static spindle.
technical parameters and characteristics of dynamic and static grinding head
dynamic and static spindle is a wear-free spindle supported by dynamic and static oil film. It combines the advantages of dynamic and static spindle and avoids its disadvantages. It will have broad application prospects in all kinds of high-precision CNC machines. Wide application range: suitable for high precision, high efficiency, heavy load, wide grinding wheel and other fields
radial runout of main shaft ≤ 0.001mm, axial runout ≤ 0.001mm
the spindle speed is related to the shaft diameter. If the shaft diameter is large, the speed is low, and if the shaft diameter is small, the speed is high. The speed range is 800-5000 / min
front and rear hydrostatic oil chamber seat temperature < 60℃。
the accumulator is powered off and the pressure is maintained for not less than 1 minute
the spindle running noise is less than 65 dB
within the range of cutting conditions: The main shaft shall work normally without abnormal noise
machined surface roughness Ra <0.6um
oil model: No. 2 main shaft oil
the oil supply pressure of the hydraulic station is 1.8-2.5mpa, and the main shaft can work normally
when installing a simple grinding wheel, the speed per second shall be ≤ 60m to avoid accidents