ch
English
The fault manifestations of the fully automatic CNC bearing outer ring groove grinding machine include but are not limited to the following situations:
1. Error or inability to start during system startup: If it is not possible to inspect and lubricate various parts of the equipment before startup, and confirm that there are no abnormalities, the system cannot start normally.
2. The operation interface cannot be displayed or operates abnormally: If the operator needs to obtain an operation certificate and be familiar with the performance of the grinding machine, but the operation interface cannot be displayed or operates abnormally.
3. Equipment malfunction: If it is necessary to leave the grinding machine during operation, the equipment should be stopped. The equipment cannot function properly.
4. Abnormal sound or vibration of equipment: If there is any abnormal sound or vibration of the equipment, daily maintenance should be carried out after work is completed, and the handover record book should be filled out carefully.
5. Equipment temperature too high or too low: For example, regular maintenance includes replacing lubricating oil, cleaning oil tanks, etc. The equipment temperature is too high or too low.
6. Equipment failure alarm: For example, the methods of fault analysis include intuitive method, alarm method, condition display method, parameter verification method, etc., and equipment failure alarm.
7. Equipment cannot stop normally: If the cause of the malfunction is confirmed, the spare parts replacement method or parameter modification method can be used for maintenance, but the equipment cannot stop normally.
The above are the possible fault manifestations of the fully automatic CNC bearing outer ring groove grinder. If these situations occur, the equipment should be stopped immediately and the equipment manufacturer or professional maintenance personnel should be contacted for repair.
