Maintenance of the pneumatic oil mist system for CNC lathes

In the CNC lathe system, the oil mist system is a very important place. Because oil mist threatens our physical understanding, we need to take it seriously, do a good job in daily protection and maintenance, and try not to threaten our body shape with danger. We hope that CNC lathes will continue to innovate and fundamentally address this problem. Thoroughly dealing with problems is not a matter of one or two days, it should start with daily protection and maintenance

1. Choose a suitable filter to remove impurities and moisture from compressed air

2. Check the oil supply of the oil mist eliminator in the system to ensure that there is an appropriate amount of smooth oil in the air, making the pneumatic components smooth and avoiding air leakage and component failure caused by rust and wear

3. Adhere to the tightness of the pneumatic system and regularly inspect and replace the seals

4. Pay attention to adjusting work pressure

5. Regularly inspect to clean or replace pneumatic components and filters